Showing 1–12 of 21 results
-
Dapping Block (Flat) (M)
Rs. 2,520.00Dapping block used to shape softer metals into half rounds by hammering into the depressions. Create rounds by making two half-rounds and soldering together.
-
Dapping Block (Flat) (L)
Rs. 3,800.00Dapping block used to shape softer metals into half rounds by hammering into the depressions. Create rounds by making two half-rounds and soldering together.
-
Steel Dapping Block (3.75cm)
Rs. 2,000.00Dapping block used to shape softer metals into half rounds by hammering into the depressions. Create rounds by making two half-rounds and soldering together.
-
Steel Dapping Block (3cm)
Rs. 1,200.00Dapping block used to shape softer metals into half rounds by hammering into the depressions. Create rounds by making two half-rounds and soldering together.
-
Disc Cutter Set
Rs. 2,250.00This disc cutter set is used to produced round disks of metal from soft precious metals such as gold, silver or copper up to 20 gauge thick. Other jewelry metals such as copper, brass, and nickel silver can also be cut using care and common sense.
-
Dual Sided Anvil
Rs. 1,025.00Brass Marking Anvil For Shaping Rings This is a new brass marking anvil This brass anvil secures ring bands in a rounded cut out that prevents flat spotting on the shank when quality marking or hall mark stamping This is dual sided one side is for marking men’s rings and the other side is for marking women’s rings It measures approximately 2 1/2″ x 1 1/4″ x 3/4″ (62 x 31 x 19 mm)
-
Anvil Horn
Rs. 2,000.00Steel anvil horn used for flattening and shaping metal. Surfaces should be kept clean and polished as any marks will impress on the surface of the metal.
-
Steel Combination Block (2.5)
Rs. 3,200.00- Cavity sizes (mm): 4.5, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 16, 18, 20, 25 mm 32 cavities on 6 sides: 15 half spheres, 5 U-shapes, 6 V-shapes, and 6 flat shapes Dimensions: 2″ x 2″ x 2″
-
Wooden Stand For Dapping Punches
Rs. 525.00For forming and doming sheet metal, polished without pits or flaws. Hardwood stand holds all the pieces for easy access. each punches has a corresponding slot in the wooden holding block. The block is completely smooth on the opposite side for use as a bench block.
-
Wooden Stand For Dapping Punches
Rs. 850.00For forming and doming sheet metal, polished without pits or flaws. Hardwood stand holds all the pieces for easy access. each punches has a corresponding slot in the wooden holding block. The block is completely smooth on the opposite side for use as a bench block.
-
Wooden Stand For Dapping Punches
Rs. 675.00For forming and doming sheet metal, polished without pits or flaws. Hardwood stand holds all the pieces for easy access. each punches has a corresponding slot in the wooden holding block. The block is completely smooth on the opposite side for use as a bench block.
-
Doming Brass Block 2.50”
Rs. 6,700.00These can then be used to make bead caps or fixed together to make round or lentil shaped hollow beads as well as adding a three-dimensional element to your jewelry designs. We love using this to give flat pieces of jewelry a slight curve as it adds elegance to the shape and gives a more professional finish.